H
E
L
P

Products pumps for dangerous chemical liquids Agi Pompe

Products

The range of pumps that we produce and market is based on the close collaboration with Business Partners with proven experience in the field of pumps for hazardous, corrosive, fragile or viscous liquids.

Our electric and pneumatic pumps cover a very wide range of possible needs: from low flow-rates for laboratory and dosing needs to the transfers of commercial products such as very aggressive commercial acids, diluted or concentrated; flammable liquids in general as solvents and most of the oil derivatives, food liquids and viscous cosmetics as pastes and creams.

Special pumps for semiconductors assembled in a clean room.

Atex certification for work in hazardous areas.

68 Elements
 SERIES "CXM" (for transfers)

SERIES "CXM" (for transfers)

New range CXM. Double diaphragm pneumatic pumps (AODD). As a further development of the range CXR universal pumps Almatec, the new CXM series…
.JP RANGE

.JP RANGE

Floater bodies in PP (polypropylene), PVDF (polyvinylidene fluoride), aluminum and stainless steel AISI 316 TI. Three-phase motors IP24, IP44,…
.Piston manual pumps SERIES JP 02

.Piston manual pumps SERIES JP 02

Universal piston manual pump with three positions lever. Flow-rates from 0.3 to 0.45 liters. Body in PP (polypropylene), stainless steel AISI…
.Piston manual pumps SERIES JP 03

.Piston manual pumps SERIES JP 03

For alcohol, shampoo, water, oil, diesel and neutral liquids in general. Body in PP (polypropylene), normal steel stem, NBR seals, telescopic…
.Piston manual pumps SERIES JP 04 - blue

.Piston manual pumps SERIES JP 04 - blue

Piston pumps in PP (polypropylene) with no metal parts, Viton seals, suction telescopic tube for draft from 480 to 950 mm, rough flow-rate 0.3…
.Piston manual pumps SERIES JP 04 - blue/white

.Piston manual pumps SERIES JP 04 - blue/white

Piston pumps in PP (polypropylene) with no metal parts, Viton seals, suction telescopic tube for draft from 480 to 950 mm, rough flow-rate 0.3…
.Piston manual pumps SERIES JP 04 - red

.Piston manual pumps SERIES JP 04 - red

Piston pumps in PP (polypropylene) with no metal parts, Viton seals, suction telescopic tube for draft from 480 to 950 mm, rough flow-rate 0.3…
.Piston manual pumps SERIES JP 04 - yellow

.Piston manual pumps SERIES JP 04 - yellow

Piston pumps in PP (polypropylene) with no metal parts, Viton seals, suction telescopic tube for draft from 480 to 950 mm, rough flow-rate 0.3…
.Piston manual pumps SERIES JP 05 - 1000 mm

.Piston manual pumps SERIES JP 05 - 1000 mm

Particularly suitable for food liquids, pharmaceutical products and solvents. Stainless steel AISI 316 L body with piston and foot in PTFE (Teflon),…
.Piston manual pumps SERIES JP 05 - 700 mm

.Piston manual pumps SERIES JP 05 - 700 mm

Particularly suitable for food liquids, pharmaceutical products and solvents. Stainless steel AISI 316 L body with piston and foot in PTFE (Teflon),…
.Piston manual pumps SERIES JP 07 - blue

.Piston manual pumps SERIES JP 07 - blue

Entirely made of polypropylene, in three versions with different gaskets: BLUE with NBR seals, RED with EPDM seals and GREEN with VITON seals.…
.Piston manual pumps SERIES JP 07 - green

.Piston manual pumps SERIES JP 07 - green

Entirely made of polypropylene, in three versions with different gaskets: BLUE with NBR seals, RED with EPDM seals and GREEN with VITON seals.…
.Piston manual pumps SERIES JP 07 - red

.Piston manual pumps SERIES JP 07 - red

Entirely made of polypropylene, in three versions with different gaskets: BLUE with NBR seals, RED with EPDM seals and GREEN with VITON seals.…
.Piston manual pumps SERIES JP 08

.Piston manual pumps SERIES JP 08

PVDF body with PTFE seals, rotary, suitable for various liquids and very corrosive acids also concentrated, indicative flow-rate 0.3 liters…
.Piston manual pumps SERIES JP 11

.Piston manual pumps SERIES JP 11

Rotary pump in aluminum and galvanized steel for the transfer of lubricating oils, diesel and slightly viscous neutral liquids; flow-rate 1…
.Piston manual pumps SERIES JP 13

.Piston manual pumps SERIES JP 13

Rotary pump in cast iron and steel for the transfer of lubricating oils, diesel and slightly viscous neutral liquids, flow-rate 0.3 liters per…
.Tubing for industrial peristaltic pumps "Teknoprene®"

.Tubing for industrial peristaltic pumps "Teknoprene®"

Our replacement tubes for peristaltic pumps are made of special long-tested rubber to offer customers the maximum durability and reliability.…
Accessories

Accessories

- adaptors for drums of 2 "in PP and stainless steel - dirt traps for the filtering of foreign solid bodies - wall supports for proper seating…
Air motors

Air motors

Power from 300 to 600 Watt, all ATEX certified, for laboratory and transfer pumps. Equipped with ball valve in power and universal unified adapter…
Automatic and manual dispensers

Automatic and manual dispensers

For precise and safe dosing of viscous liquids, as required by EU law, thanks to its convenient funnel system.
Battery pumps

Battery pumps

For water, diesel, low viscosity oils, low-aggressive and non-flammable neutral liquids. Materials: PP, PE and ABS. Maximum flow-rate 80 l/min,…
Cavity dosing systems

Cavity dosing systems

Example of multiple controlled dosing, precise and reliable, for liquids of low and medium viscosity, using horizontal cavity pumps “Jessberger”. Frame…
Diaphragm and diving piston dosing pump - Series DTK

Diaphragm and diving piston dosing pump - Series DTK

Diaphragm and diving piston dosing. Manual adjustement from 0 + 100% Motor 3phases or monophases Flow-rate from 3.2 up to 500 l/h Head pressure…
Dispensive gun

Dispensive gun

Fast closing dispensing gun in PP with Viton seals and spring in titanium. Special versions in stainless steel and PVDF with hose 15, 20 or…
diving piston dosing pump M25/M35

diving piston dosing pump M25/M35

Membrane and diving piston dosing pump Flow-rate 44 to 1566 liters / hour Pressure up to 30 Bar
Dosing set

Dosing set

. Polyethylene tank lt. 1000 complete of inlet with screw and minimum level alarm . Dosing pump in PVC . Plate for the mounting to the tank .…
Double diaphragm pneumatic pumps SERIES "AH"

Double diaphragm pneumatic pumps SERIES "AH"

Double diaphragm pneumatic pumps, special series for high pressures and filter presses. Powered by air without lubrication with patented anti-stall…
Electronic digital flowmeter

Electronic digital flowmeter

Body and turbine in PP, PVDF or stainless steel, also ATEX certified. Flow-rate from 20 to 125 liters / min, max pressure 2 Bar.
IPI range - General catalogue

IPI range - General catalogue

New series of peristaltic pumps, evolution of the time series A.G.I. The range consists of four models, three of which with flow-rates ranging…
Laboratory pumps

Laboratory pumps

Pumps for small transfers of hazardous liquids from drums or baskets. Versions in PP or stainless steel. Complete sample groups (pump, delivery…
Micropumps SERIES "AD 6" for laboratory

Micropumps SERIES "AD 6" for laboratory

Available only on request. Pumps for sampling in depth, maximum flow-rate 250 l/h, head up to almost 5 Bar.
Model MA 180/15/120

Model MA 180/15/120

Electric diaphragm pump with spring return with adjustable stroke and, alternatively, with piston rod with positive return. Head in PP (polypropylene),…
MODEL PI 10

MODEL PI 10

Dry crushing with three rolls, special elastomer Teknoprene ® tubes, colour ivory, FDA and corrosion, coupled with three-phase gearmotors,…
MODEL PI 15

MODEL PI 15

Universal multipurpose pumps with three rolls, for heavy-duty or continuous applications. Classic characteristics of the peristaltic pump. Flow-rates…
MODEL PI 15 P

MODEL PI 15 P

Upon request, it is possible to realize the pump with pneumatic supply. Flow-rate linked to the power of the motor and to the reduction ratio…
MODEL PI 20/30

MODEL PI 20/30

Robust, reliable, versatile pump Flow-rates from 60 to 1,000 l/h and pressures up to 4 Bar.
MODEL PI 45

MODEL PI 45

These pumps are particularly suitable for pumping dirty liquids, viscous and abrasive. The tubes mounted on these pumps are made on spindle…
Other models (JP12, JP14, JP15, JP16, JP17)

Other models (JP12, JP14, JP15, JP16, JP17)

This range solves any working need, also for flammable and dangerous liquids in general.
Replacement tubes for detergency peristaltic pumps "Teknoprene®"

Replacement tubes for detergency peristaltic pumps "Teknoprene®"

Our replacement tubes for peristaltic pumps are made of special long-tested rubbers to offer customers maximum durability and reliability. The…
SERIES "BIOCOR"

SERIES "BIOCOR"

Manufactured according to DIN 118664/1, 3A, EHEDG, FDA and USDA specifications, ATEX certified, easy disassembly, clean and sterilization. Two…
SERIES "CHEMICOR"

SERIES "CHEMICOR"

Three pump models for flow-rates from 0.1 to 23 cubic meters/hour and head up to 70 meters, made of AISI 316 stainless steel (1.4408) normal…
SERIES "E"

SERIES "E"

Seven pump models for flow-rates from 0.1 to 50 cubic meters/hour and head up to 7 Bar, executions in High Molecular Weight Polyethylene or…
SERIES "FUTUR"

SERIES "FUTUR"

For the semiconductor industry, in PTFE and stainless steel, assembled in a clean room for extra pure fluids, 4 models from 20 to 200 l/min,…
SERIES ABAQUE

SERIES ABAQUE

Coupled with three-phase gearmotors, reversible, variable speed with mechanical gearmotors or inverter from 10 to 60 rpm per minute (max 100).…
Page 1 Of 2